Switchboard upgrades on the Gold Coast
Old fuse boards are the most common reason Gold Coast homes trip power, fail inspections and struggle with EV chargers, air conditioning and induction cooktops. We replace them with a compliant switchboard fitted with RCD safety switches, surge protection and room for the circuits you will add next.
From $1,490
Typical starting price
4 to 6 hours
Most single-phase homes
Certified
Testing and safety certificate
12 months
Workmanship warranty
Licensed, accredited and insured
Master Electricians
Electrical Safety Office
Clean Energy Council
Tesla Powerwall Certified
Signs your switchboard needs upgrading
Most homes built on the Gold Coast before the mid-1990s still run on their original board. If any of these sound familiar, it is time for an electrician to take a look.
What's included in a switchboard upgrade
Every upgrade is scoped to your home, but most include the following.
New switchboard enclosure
A modern board with labelled circuit breakers and spare capacity for future circuits.
RCD safety switches
Safety switches on every power and lighting circuit, as required for new work in Queensland.
Surge protection
A whole-of-home surge diverter to protect appliances through Gold Coast storm season.
Meter box and Energex booking
We replace the meter panel where needed and book Energex to disconnect and reconnect supply.
How much does a switchboard upgrade cost on the Gold Coast?
Most single-phase homes land between $1,490 and $2,400. The final price depends on how many circuits you have, whether the meter box needs replacing, the condition of the existing wiring and whether Energex needs to attend. You get a fixed written price on site before any work starts.
RCD safety switch retrofit
Add safety switches to an existing modern board
from
$450
Switchboard replacement
Single-phase, up to 8 circuits with RCDs
from
$1,490
Switchboard and meter box
New enclosure, meter panel and Energex booking
from
$2,400
Three-phase upgrade
For EV chargers, ducted air and workshops
from
$3,500
Prices include GST, materials, testing and certification.
Our switchboard upgrade process
01
Inspect and quote
We test your existing board and circuits, then give you a fixed written price.
02
Book the changeover
We schedule a time that suits you and coordinate Energex if the supply needs isolating.
03
Install and test
Power is off for four to six hours while we fit and test the new board.
04
Certify and hand over
You receive a Certificate of Testing and Safety and a labelled circuit chart.
Standards and compliance
All work is carried out by A-grade licensed electricians to AS/NZS 3000 (the Wiring Rules) and Queensland Electrical Safety Office requirements. We notify the network where required and issue a Certificate of Testing and Safety for every upgrade.
Fixed-price quote
Get a fixed price for your switchboard upgrade
Send a few details and photos of your board. We reply within the hour in business hours.
Power out or the board is sparking?
Switch off at the main if it is safe to do so and call our 24/7 line on 07 5550 1420.
Recent jobs
Switchboard upgrades we've completed
Reviews
What clients say about our switchboard work
“Fixed price, on time and spotless. Exactly what you want from a sparky.”
Replaced our old fuse board with a new switchboard and safety switches in one morning. Clear advice and no upselling.
Daniel K.
Upper Coomera · Switchboard upgrade
“They sorted Energex for us, which was the part I was dreading.”
Our meter box needed replacing too. Volt One booked the disconnection, did the work in a day and sent the certificate that night.
Priya R.
Southport · Board and meter box
“Finally able to run the dryer and the air con at the same time.”
Explained exactly why the old board kept tripping and what the new one fixes. Tidy job and great communication.
Mark T.
Helensvale · Switchboard upgrade
FAQs
Switchboard questions
The questions we hear most before a switchboard upgrade.
How much does a switchboard upgrade cost on the Gold Coast?
Most single-phase homes land between $1,490 and $2,400. A board and meter box replacement typically starts around $2,400, and three-phase upgrades from $3,500. You get a fixed written price before we start.
How long will my power be off?
Usually four to six hours for a standard single-phase upgrade. We tell you the exact window when we book, and can stage the work so your fridge is off for as little time as possible.
Do I need a new switchboard to install an EV charger?
Not always. Many modern boards have room for a dedicated EV circuit. Older boards with ceramic fuses, or homes on a small supply, usually need an upgrade first. We check this as part of the EV charger quote.
Are safety switches compulsory in Queensland?
Any new or altered circuit must be protected by an RCD, and Queensland rental and sale rules require safety switches on power circuits. We recommend RCDs on every power and lighting circuit.
Will Energex need to attend?
If the meter box or main supply needs to be isolated, yes. We book Energex for you and coordinate the timing so you only deal with one trade.
Is the upgrade covered by a warranty?
Yes. All workmanship carries our 12-month warranty, and the switchboard components carry the manufacturer warranty.
Related services
Often done with a switchboard upgrade
Service areas
Switchboard upgrades near you
Get in touch
Ready to replace your old switchboard?
Send us a photo of your board and we will come back with a fixed price, usually within the hour.